home     contact us     links     Mission Statement
AXLE   CLUTCH   DRIVE SHAFTS   INSTALLATION   TRANSMISSION/TRANSFER CASE   OTHER   LINECARD

 

 
CYCLONE FANS

Cyclone Power Fan for the Ford PowerStroke and V-10

The Power of the Cyclone 

Harness a load of power and performance with the revolutionary Cyclone Power Fan. Designed to work with both gasoline and diesel powered trucks and RVs, the Cyclone Power Fan harnesses the wind to:

  • Add Up To 40 More Horsepower 
  • Better Fuel Mileage 
  • Improve Engine and Transmission Cooling 
  • Increase Air Conditioning Performance 
  • Assists in Down-hill Braking Power 

The Principle Behind the Cyclone 

Drive Train Specialists include - performance products - performance diesel products - A stock engine fan clutch is designed to operate continuously, regardless of drivetrain temperatures. Whenever the fan is operating it is a parasitic draw on both horsepower and fuel economy. The Cyclone Power Fan is designed to recoup this continual loss of power and performance.

Extensive tests on Ford V-10 and PowerStroke vehicles show that the engine fan on these vehicles are typically needed for cooling only 2% of the time. In normal driving conditions, 98% of the time, ram air is sufficient to keep the drivetrain cool. the fan is needed when outside temperatures are excessive, or when a vehicle is sitting stationary for a long period of time. In all other operating conditions the fan is simply a drain on power and fuel.

The Logic of the Cyclone

The Cyclone is designed to automatically disengage the fan when outside temperatures and normal ram air is sufficient to cool the drivetrain. Remember, most of the time there is sufficient air created from normal acceleration to keep the engine cool without running the fan.

The Cyclone also will engage the fan, when operating conditions warrant added cooling. But unlike the stock fan clutch, the Cyclone Power Fan synchronizes the fan's rotation to each engine revolution, spinning it much faster than the stock fan clutch. This improved technology provides much improved cooling to the engine and transmission.

With the Cyclone installed, there is a marked difference in air conditioner performance. There will be a dramatic increase in coolness and improved air volume.

Back to Top

Fluid Thermistor Control Unit Harnesses The Wind For More Power And Performance

Drive Train Specialists include - performance products - performance diesel products - The Cyclone Power Fan replaces the factory, or original equipment, fan clutch. The O.E. fan clutch is controlled by changes only in air temperature. Working on the same principle as an electromagnetic air conditioner compressor clutch, the Cyclone Power Fan completely disengages the stock fan or engages it on an as-need basis as determined by a state-of-the-art, fluid thermistor control unit.

The attractive control unit is conveniently mounted in the cab and has two main features: 1) a manual override option to activate high-powered cooling control and, 2) thermistor fluid sensors that read changes in outside temperature, engine coolant and transmission fluid temperature, engine coolant and transmission fluid temperatures. As the outside temperature rises, throttle position changes, or as coolant fluid temperature changes, indicating stressful operating conditions, the Cyclone will engage the fan for added cooling to the engine and cab. A highly visible power light on the unit indicates when the Cyclone has engaged or disengaged the fan.

New Technology Reaps Rewards In Power And Performances

When the fan is disengages, expect a significant increase in horsepower and fuel mileage. Dyno tests repeatedly show gains of 40 more horsepower and an increase in fuel mileage on Ford PowerStroke and V-10 vehicles.

Downhill braking performance is improved with the Cyclone. In downhill towing when braking is most stressful to the vehicle, use the Cyclone to manually engage the fan and safely add powerful retarding horsepower to slow the momentum of your vehicle.

The Value Of The Cyclone

The Cyclone Power Fan is a better overall value than either power chips or performance headers and exhaust systems in delivering horsepower, performance and fuel savings. Priced substantially less, the Cyclone delivers the same increase in horsepower and fuel savings, but only the Cyclone delivers improved air conditioner performance, improved cooling to the engine and transmission and can assist with engine braking.

The Cyclone has a big performance impact for a relatively low price. Unlike performance power chips, the Cyclone does not need calibration. And unlike performance exhaust systems, the Cyclone does not in any way effect emissions.

The Cyclone, hands down, is the best way to reap a constant reward of up to 40 more horsepower and more fuel mileage, mile after mile.

Cyclone Applications

The Cyclone is easy to install and is designed for installation specifically on Ford PowerStroke and for V-10 trucks and class A motorhomes. It is especially beneficial for commercial fleets where the vehicle spends a lot of time sitting stationary while the engine is running to operate: changing systems, hydraulics, PTO's, life-support equipment and air conditioning.

CONTACT US FOR MORE INFORMATION

Back to Top

- OVER $6,000,000 in Parts - In Stock, Right Now! -

And Best Of All, KNOWLEDGEABLE PARTS COUNTER ASSISTANCE

Contact Drive Train Specialists for additional information
Light Truck Parts, Medium Duty Truck Parts & Heavy Duty Truck Parts

9809 E. 44th Pl
Tulsa, OK 74146

Copyright © 2003-2007 Drive Train Speciailists

Rebuilt, transmission, crane carrier parts, ccc parts, fuller, eaton, rockwell, parts, new, used, mack, spicer, dana, ttc, fabco, marmom harrington, ZF, isuzu, new process, clark, borg warner, allison automatic, ford, international, navstar, IHC, oshkosh, FWD, mercedes, muncie, chelsea, Transmission, Differential, Rear End, Transfer Case, Steering box, spindle, PTO. rebuilt, new, used, transmissions, differentials, rear ends, transfer cases, steering gear, power take off units, spindles, axle housing repair, Axle shaft, axles. ring gear and pinion, parts, rebuild kits, service for all makes and models. We rebuild any transmission, differential, rear end, rearend, transfercase, steering box, spindle, PTO


We proudly accept:

Privacy Policy

Toll Free
800-722-9164
Tulsa area
918-664-1371
Call Hours
8:00 am - 5:00 pm CST
Monday - Friday