|
JEEP |
|
|
|
Model |
Application |
ID# |
Part# |
Transfer Case Motors |
Year |
|
CHEROKEE |
23 spline input 27
spline rear slip output two wire shift indicator,
1 piece tail housing shift indicator above shift
lever w/rubber boot, fixed front yoke .840"
exposed input shaft New Process |
NP231J |
UMT207-2 |
|
2001-97 |
|
CHEROKEE |
23
spline input 27 spline rear slip output two wire
shift indicator, 1 piece tail housing shift
indicator above shift lever w/rubber boot, fixed
front yoke 1.550" exposed input shaft New Process |
NP231J |
UMT207-3 |
|
2001-97 |
| CHEROKEE |
23 spline input with
rear fixed yoke (conversion kit) two wire shift
indicator, 1 piece tail housing shift indicator
above shift lever w/rubber boot, fixed front yoke
1.550" exposed input shaft NOTE: different drive
shaft and other components are needed w |
NP231J |
UMT207-3FY |
|
2001-97 |
|
CHEROKEE |
23
spline input with rear fixed yoke (conversion
kit), 27 spline rear slip output, two wire shift
indicator, 1 piece tail housing, shift indicator
above shift lever, w/rubber boot, fixed front
yoke, .840" exposed input shaft NOTE: different
drive shaft an |
NP231J |
UMT207-2FY |
|
2001-97 |
| CHEROKEE |
21 spline front input
27 spline slip rear w/rubber boot, fixed front
output yoke two wire indicator switch above shift
lever .750" exposed input shaft New Process |
NP231J |
UMT207-7 |
|
2001-94 |
|
CHEROKEE |
21
spline front input with rear fixed yoke
(conversion kit) w/rubber boot, fixed front output
yoke two wire indicator switch above shift lever
.750" exposed input shaft NOTE: different drive
shaft and other components are needed with these
units (Not Supp |
NP231J |
UMT207-7FY |
|
2001-94 |
| CHEROKEE |
23 spline input 27
spline rear slip output two wire shift indicator,
1 piece tail housing shift indicator above shift
lever w/rubber boot, fixed front yoke .840"
exposed input shaft New Process |
NP231J |
UMT207-2 |
|
2000-97 |
|
CHEROKEE |
23
spline input 27 spline rear slip output two wire
shift indicator, 1 piece tail housing shift
indicator above shift lever w/rubber boot, fixed
front yoke 1.550" exposed input shaft New Process |
NP231J |
UMT207-3 |
|
2000-97 |
| CHEROKEE |
23 spline input with
rear fixed yoke (conversion kit) two wire shift
indicator, 1 piece tail housing shift indicator
above shift lever w/rubber boot, fixed front yoke
1.550" exposed input shaft NOTE: different drive
shaft and other components are needed w |
NP231J |
UMT207-3FY |
|
2000-97 |
|
CHEROKEE |
23
spline input with rear fixed yoke (conversion
kit), 27 spline rear slip output, two wire shift
indicator, 1 piece tail housing, shift indicator
above shift lever, w/rubber boot, fixed front
yoke, .840" exposed input shaft NOTE: different
drive shaft an |
NP231J |
UMT207-2FY |
|
2000-97 |
| CHEROKEE |
21 spline front input
27 spline slip rear w/rubber boot, fixed front
output yoke two wire indicator switch above shift
lever .750" exposed input shaft New Process |
NP231J |
UMT207-7 |
|
2000-94 |
|
CHEROKEE |
21
spline front input with rear fixed yoke
(conversion kit) w/rubber boot, fixed front output
yoke two wire indicator switch above shift lever
.750" exposed input shaft NOTE: different drive
shaft and other components are needed with these
units (Not Supp |
NP231J |
UMT207-7FY |
|
2000-94 |
| CHEROKEE |
Select-Trac, 23
spline input, 27 spline rear slip, fixed front
output yoke, 1.750 speedo hole, one piece tail
housing w/rubber boot, four wire shift indicator
located above shift lever, .840" exposed input
shaft New Process |
NP242J |
UMT208-2 |
|
1998-96 |
|
CHEROKEE |
Select-Trac, 23 spline input, 27 spline rear slip,
fixed front output yoke, 1.750 speedo hole, one
piece tail housing w/rubber boot, four wire shift
indicator located above shift lever, .840" exposed
input shaft New Process |
NP242J |
UMT208-2 |
|
1998-96 |
| CHEROKEE |
Select-Trac, 23
spline input, 27 spline rear slip, .750" exposed
input shaft, fixed front yoke, two piece tail
shaft housing, w/1.750 speedo hole, two wire shift
indicator in speedo housing New Process |
NP242J |
UMT208-3 |
|
1995-93 |
|
CHEROKEE |
Select-Trac, 23 spline input, 27 spline rear slip,
.750" exposed input shaft, fixed front yoke, two
piece tail shaft housing, w/1.750 speedo hole, two
wire shift indicator in speedo housing New Process |
NP242J |
UMT208-3 |
|
1995-93 |
| CHEROKEE |
23 spline front input
27 spline slip rear two piece tail housing, 1.750
speedo hole two wire indicator switch in speedo
housing fixed front yoke, .750" exposed input
shaft New Process |
NP231J |
UMT207-6 |
|
1992-89 |
|
CHEROKEE |
23
spline front input 27 spline slip rear two piece
tail housing, 1.750 speedo hole two wire indicator
switch in speedo housing fixed front yoke, .750"
exposed input shaft New Process |
NP231J |
UMT207-6 |
|
1992-89 |
| CHEROKEE |
23 spline input, 27
spline slip rear, two piece tail housing, w/speedo
hole 1.750, fixed front output yoke, four wire
indicator switch, .750" exposed input shaft New
Process |
NP242J |
UMT208-5 |
|
1992 |
|
CHEROKEE |
23
spline input, 27 spline slip rear, two piece tail
housing, w/speedo hole 1.750, fixed front output
yoke, four wire indicator switch, .750" exposed
input shaft New Process |
NP242J |
UMT208-5 |
|
1992 |
| CHEROKEE |
23 spline front input
front and rear fixed yokes w/two wire terminal on
back half of case (may have round or fixed type
front output yokes) viscous clutch, 1.750" speedo
hole New Process |
NP229J |
UMT206-1 |
|
1991-87 |
|
CHEROKEE |
23
spline input viscous clutch, two fixed yokes 1.750
speedo hole, has no shift indicator in case New
Process |
NP229J |
UMT205-1 |
|
1991-87 |
| CHEROKEE |
23 spline front input
front and rear fixed yokes w/two wire terminal on
back half of case (may have round or fixed type
front output yokes) viscous clutch, 1.750" speedo
hole New Process |
NP229J |
UMT206-1 |
|
1991-84 |
|
CHEROKEE |
23
spline input viscous clutch, two fixed yokes 1.750
speedo hole, has no shift indicator in case New
Process |
NP229J |
UMT205-1 |
|
1991-84 |
| CHEROKEE |
21 spline front
input, 27 spline rear slip output, 1.750
speedometer hole, two piece tail housing, fixed
front yoke vacuum shift indicator on speedo
housing, .750 exposed input shaft New Process |
NP231J |
UMT207-5 |
|
1990-87 |
|
CHEROKEE |
21
spline front input, with rear fixed yoke
(conversion kit), 1.750 speedometer hole, two
piece tail housing, fixed front yoke vacuum shift
indicator on speedo housing, .750 exposed input
shaft NOTE: different drive shaft and other
components are needed w |
NP231J |
UMT207-5FY |
|
1990-87 |
| CHEROKEE |
21 spline front
input, 27 spline rear slip output, 1.750
speedometer hole, two piece tail housing, fixed
front yoke vacuum shift indicator on speedo
housing, .750 exposed input shaft New Process |
NP231J |
UMT207-5 |
|
1990-87 |
|
CHEROKEE |
21
spline front input, with rear fixed yoke
(conversion kit), 1.750 speedometer hole, two
piece tail housing, fixed front yoke vacuum shift
indicator on speedo housing, .750 exposed input
shaft NOTE: different drive shaft and other
components are needed w |
NP231J |
UMT207-5FY |
|
1990-87 |
| CHEROKEE |
Select-Trac, 21
spline input, 27 spline rear slip, two piece tail
housing, fixed front yoke, 1.750 speedo hole, two
wire shift indicator on tail housing, .750"
exposed input shaft New Process |
NP242J |
UMT208-1 |
|
1989-87 |
|
CHEROKEE |
Select-Trac, 21 spline input, 27 spline rear slip,
two piece tail housing, fixed front yoke, 1.750
speedo hole, two wire shift indicator on tail
housing, .750" exposed input shaft New Process |
NP242J |
UMT208-1 |
|
1989-85 |
| CHEROKEE |
23 spline front input
front and rear fixed yokes shift indicator located
to the left side of shift 1.750 speedo hole, Left
Hand Mount New Process |
NP208J |
UMT204-2 |
|
1988-87 |
|
CHEROKEE |
23
spline front input front and rear fixed yokes
shift indicator located to the left side of shift
1.750 speedo hole, Right Hand Mount New Process |
NP208J |
UMT204-1 |
|
1988-87 |
| CHEROKEE |
23 spline front input
front and rear fixed yokes shift indicator located
to the left side of shift 1.750 speedo hole, Left
Hand Mount New Process |
NP208J |
UMT204-2 |
|
1988-84 |
|
CHEROKEE |
23
spline front input front and rear fixed yokes
shift indicator located to the left side of shift
1.750 speedo hole, Right Hand Mount New Process |
NP208J |
UMT204-1 |
|
1988-84 |
| CHEROKEE |
23 spline front input
front and rear fixed yokes shift indicator located
to the left side of shift 1.750 speedo hole, Left
Hand Mount New Process |
NP208J |
UMT204-2 |
|
1987-85 |
|
CHEROKEE |
23
spline front input front and rear fixed yokes
shift indicator located to the left side of shift
1.750 speedo hole, Right Hand Mount New Process |
NP208J |
UMT204-1 |
|
1987-85 |
| CHEROKEE |
23 spline front input
front and rear fixed yokes w/two wire terminal on
back half of case (may have round or fixed type
front output yokes) viscous clutch, 1.750" speedo
hole New Process |
NP229J |
UMT206-1 |
|
1987-85 |
|
CHEROKEE |
23
spline input viscous clutch, two fixed yokes 1.750
speedo hole, has no shift indicator in case New
Process |
NP229J |
UMT205-1 |
|
1987-85 |
| CHEROKEE |
Select-Trac, 21
spline input, 27 spline rear slip, two piece tail
housing, fixed front yoke, 1.750 speedo hole, two
wire shift indicator on tail housing, .750"
exposed input shaft New Process |
NP242J |
UMT208-1 |
|
1987-85 |
|
CHEROKEE |
21
spline front input, 27 spline rear slip output,
1.750 speedometer hole, two piece tail housing,
fixed front yoke vacuum shift indicator on speedo
housing, .750 exposed input shaft New Process |
NP231J |
UMT207-5 |
|
1987 |
| CHEROKEE |
21 spline front
input, with rear fixed yoke (conversion kit),
1.750 speedometer hole, two piece tail housing,
fixed front yoke vacuum shift indicator on speedo
housing, .750 exposed input shaft NOTE: different
drive shaft and other components are needed w |
NP231J |
UMT207-5FY |
|
1987 |
|
CHEROKEE |
Select-Trac, 21 spline input, 27 spline rear slip,
two piece tail housing, fixed front yoke, 1.750
speedo hole, two wire shift indicator on tail
housing, .750" exposed input shaft New Process |
NP242J |
UMT208-1 |
|
1986-85 |
| CHEROKEE |
23 spline front input
front and rear fixed yokes shift indicator located
to the left side of shift 1.750 speedo hole, Left
Hand Mount New Process |
NP208J |
UMT204-2 |
|
1986-84 |
|
CHEROKEE |
23
spline front input front and rear fixed yokes
shift indicator located to the left side of shift
1.750 speedo hole, Right Hand Mount New Process |
NP208J |
UMT204-1 |
|
1986-84 |
| CHEROKEE |
23 spline front input
front and rear fixed yokes w/two wire terminal on
back half of case (may have round or fixed type
front output yokes) viscous clutch, 1.750" speedo
hole New Process |
NP229J |
UMT206-1 |
|
1986-84 |
|
CHEROKEE |
23
spline input viscous clutch, two fixed yokes 1.750
speedo hole, has no shift indicator in case New
Process |
NP229J |
UMT205-1 |
|
1986-84 |
| CHEROKEE |
23 spline front input
front and rear fixed yokes shift indicator in rear
half of case New Process |
NP228J |
UMT204-4 |
|
1985 |
|
CHEROKEE |
23
spline front input front and rear fixed yokes
shift indicator in rear half of case New Process |
NP228J |
UMT204-4 |
|
1985 |
| CHEROKEE |
23 spline front input
front and rear fixed yokes shift indicator in rear
half of case New Process |
NP228J |
UMT204-4 |
|
1985 |
|
CHEROKEE |
23
spline front input no shift indicator, front and
rear fixed yokes New Process |
NP228J |
UMT204-3 |
|
1984 |
| CHEROKEE |
23 spline front input
no shift indicator, front and rear fixed yokes New
Process |
NP228J |
UMT204-3 |
|
1984 |
|
CHEROKEE |
23
spline front input front and rear fixed yokes
w/two wire terminal on back half of case (may have
round or fixed type front output yokes) viscous
clutch, 1.750" speedo hole New Process |
NP229J |
UMT206-1 |
|
1983-82 |
| CHEROKEE |
23 spline input
viscous clutch, two fixed yokes 1.750 speedo hole,
has no shift indicator in case New Process |
NP229J |
UMT205-1 |
|
1983-82 |
|
CHEROKEE |
23
spline front input front and rear fixed yokes
w/two wire terminal on back half of case (may have
round or fixed type front output yokes) viscous
clutch, 1.750" speedo hole New Process |
NP229J |
UMT206-1 |
|
1983-82 |
| CHEROKEE |
23 spline input
viscous clutch, two fixed yokes 1.750 speedo hole,
has no shift indicator in case New Process |
NP229J |
UMT205-1 |
|
1983-82 |
|
CHEROKEE |
23
spline front input front and rear fixed yokes
shift indicator located to the left side of shift
1.750 speedo hole, Left Hand Mount New Process |
NP208J |
UMT204-2 |
|
1983-80 |
| CHEROKEE |
23 spline front input
front and rear fixed yokes shift indicator located
to the left side of shift 1.750 speedo hole, Right
Hand Mount New Process |
NP208J |
UMT204-1 |
|
1983-80 |
|
CHEROKEE |
23
spline front input front and rear fixed yokes
shift indicator located to the left side of shift
1.750 speedo hole, Left Hand Mount New Process |
NP208J |
UMT204-2 |
|
1983-80 |
| CHEROKEE |
23 spline front input
front and rear fixed yokes shift indicator located
to the left side of shift 1.750 speedo hole, Right
Hand Mount New Process |
NP208J |
UMT204-1 |
|
1983-80 |
|
CHEROKEE |
23
spline front input no shift indicator, front and
rear fixed yokes New Process |
NP228J |
UMT204-3 |
|
1983 |
| CHEROKEE |
23 spline front input
no shift indicator, front and rear fixed yokes New
Process |
NP228J |
UMT204-3 |
|
1983 |
|
Back to Top |
|
CJ5 |
front & rear fixed yokes, cast iron |
DANA300 |
UMT207-11 |
|
1983-81 |
| CJ5 |
front & rear fixed
yokes, cast iron |
DANA300 |
UMT207-11 |
|
1983-81 |
| CJ5 |
front & rear fixed yokes, cast iron |
DANA300 |
UMT207-11 |
|
1981 |
|
Back to Top |
| CJ7 |
front & rear fixed
yokes, cast iron |
DANA300 |
UMT207-11 |
|
1986-83 |
| CJ7 |
front & rear fixed yokes, cast iron |
DANA300 |
UMT207-11 |
|
1986-81 |
| CJ7 |
front & rear fixed
yokes, cast iron |
DANA300 |
UMT207-11 |
|
1983-81 |
| CJ7 |
front & rear fixed yokes, cast iron |
DANA300 |
UMT207-11 |
|
1981 |
|
Back to Top |
|
COMANCHE |
23 spline front input
27 spline slip rear two piece tail housing, 1.750
speedo hole two wire indicator switch in speedo
housing fixed front yoke, .750" exposed input
shaft New Process |
NP231J |
UMT207-6 |
|
1992-89 |
|
COMANCHE |
23
spline front input 27 spline slip rear two piece
tail housing, 1.750 speedo hole two wire indicator
switch in speedo housing fixed front yoke, .750"
exposed input shaft New Process |
NP231J |
UMT207-6 |
|
1992-89 |
| COMANCHE |
23 spline front input
front and rear fixed yokes w/two wire terminal on
back half of case (may have round or fixed type
front output yokes) viscous clutch, 1.750" speedo
hole New Process |
NP229J |
UMT206-1 |
|
1991-87 |
|
COMANCHE |
23
spline input viscous clutch, two fixed yokes 1.750
speedo hole, has no shift indicator in case New
Process |
NP229J |
UMT205-1 |
|
1991-87 |
| COMANCHE |
23 spline front input
front and rear fixed yokes w/two wire terminal on
back half of case (may have round or fixed type
front output yokes) viscous clutch, 1.750" speedo
hole New Process |
NP229J |
UMT206-1 |
|
1991-86 |
|
COMANCHE |
23
spline input viscous clutch, two fixed yokes 1.750
speedo hole, has no shift indicator in case New
Process |
NP229J |
UMT205-1 |
|
1991-86 |
| COMANCHE |
21 spline front
input, 27 spline rear slip output, 1.750
speedometer hole, two piece tail housing, fixed
front yoke vacuum shift indicator on speedo
housing, .750 exposed input shaft New Process |
NP231J |
UMT207-5 |
|
1990-87 |
|
COMANCHE |
21
spline front input, with rear fixed yoke
(conversion kit), 1.750 speedometer hole, two
piece tail housing, fixed front yoke vacuum shift
indicator on speedo housing, .750 exposed input
shaft NOTE: different drive shift and other
components are needed w |
NP231J |
UMT207-5FY |
|
1990-87 |
| COMANCHE |
21 spline front
input, 27 spline rear slip output, 1.750
speedometer hole, two piece tail housing, fixed
front yoke vacuum shift indicator on speedo
housing, .750 exposed input shaft New Process |
NP231J |
UMT207-5 |
|
1990-87 |
|
COMANCHE |
21
spline front input, with rear fixed yoke
(conversion kit), 1.750 speedometer hole, two
piece tail housing, fixed front yoke vacuum shift
indicator on speedo housing, .750 exposed input
shaft NOTE: different drive shift and other
components are needed w |
NP231J |
UMT207-5FY |
|
1990-87 |
| COMANCHE |
23 spline front input
front and rear fixed yokes w/two wire terminal on
back half of case (may have round or fixed type
front output yokes) viscous clutch, 1.750" speedo
hole New Process |
NP229J |
UMT206-1 |
|
1987-86 |
|
COMANCHE |
23
spline input viscous clutch, two fixed yokes 1.750
speedo hole, has no shift indicator in case New
Process |
NP229J |
UMT205-1 |
|
1987-86 |
| COMANCHE |
21 spline front
input, 27 spline rear slip output, 1.750
speedometer hole, two piece tail housing, fixed
front yoke vacuum shift indicator on speedo
housing, .750 exposed input shaft New Process |
NP231J |
UMT207-5 |
|
1987 |
|
COMANCHE |
21
spline front input, with rear fixed yoke
(conversion kit), 1.750 speedometer hole, two
piece tail housing, fixed front yoke vacuum shift
indicator on speedo housing, .750 exposed input
shaft NOTE: different drive shift and other
components are needed w |
NP231J |
UMT207-5FY |
|
1987 |
| COMANCHE |
23 spline front input
front and rear fixed yokes w/two wire terminal on
back half of case (may have round or fixed type
front output yokes) viscous clutch, 1.750" speedo
hole New Process |
NP229J |
UMT206-1 |
|
1986 |
|
COMANCHE |
23
spline input viscous clutch, two fixed yokes 1.750
speedo hole, has no shift indicator in case New
Process |
NP229J |
UMT205-1 |
|
1986 |
|
Back to Top |
|
GRAND CHEROKEE |
Select-Trac, 23
spline front input, 27 spline slip rear, w/rubber
boot, w/o speedo hole, four wire indicator switch
above shift lever, cup front output yoke, .840"
exposed input shaft New Process |
NP242J |
UMT208-4 |
|
2001-99 |
|
GRAND CHEROKEE |
Select-Trac, 23 spline front input, 27 spline slip
rear, w/rubber boot, w/o speedo hole, four wire
indicator switch above shift lever, cup front
output yoke, .840" exposed input shaft New Process |
NP242J |
UMT208-4 |
|
2001-99 |
| GRAND CHEROKEE |
23 spline front
input, front cup yoke, front output, viscous drive
New Process |
NP247 |
UMT208-8 |
|
2000-99 |
|
GRAND CHEROKEE |
23
spline front input, front cup yoke, front output,
viscous drive New Process |
NP247 |
UMT208-8 |
|
2000-99 |
| GRAND CHEROKEE |
Quadra-Trac, 23
spline input, 27 spline rear slip, viscous clutch,
slip rear output, fixed front yoke, shift
indicator located above shift lever, 1.750
speedometer hole, .840" exposed input shaft New
Process |
NP249J |
UMT209-1 |
|
1999-96 |
|
GRAND CHEROKEE |
Quadra-Trac, 23 spline input, 27 spline rear slip,
viscous clutch, slip rear output, fixed front
yoke, shift indicator located above shift lever,
1.750 speedometer hole, .840" exposed input shaft
New Process |
NP249J |
UMT209-1 |
|
1999 |
| GRAND CHEROKEE |
Select-Trac, 23
spline input, 27 spline rear slip, fixed front
output yoke, 1.750 speedo hole, one piece tail
housing w/rubber boot, four wire shift indicator
located above shift lever, .840" exposed input
shaft New Process |
NP242J |
UMT208-2 |
|
1998-96 |
|
GRAND CHEROKEE |
Quadra-Trac, 23 spline input, 27 spline rear slip,
viscous clutch, slip rear output, fixed front
yoke, shift indicator located above shift lever,
1.750 speedometer hole, .840" exposed input shaft
New Process |
NP249J |
UMT209-1 |
|
1998-96 |
| GRAND CHEROKEE |
Select-Trac, 23
spline input, 27 spline rear slip, fixed front
output yoke, 1.750 speedo hole, one piece tail
housing w/rubber boot, four wire shift indicator
located above shift lever, .840" exposed input
shaft New Process |
NP242J |
UMT208-2 |
|
1998-96 |
|
GRAND CHEROKEE |
Quadra-Trac, 23 spline input, 27 spline rear slip,
viscous clutch, slip rear output, fixed front
yoke, shift indicator located above shift lever,
1.750 speedometer hole, .840" exposed input shaft
New Process |
NP249J |
UMT209-1 |
|
1998 |
| GRAND CHEROKEE |
Select-Trac, 23
spline input, 27 spline rear slip, fixed front
output yoke, 1.750 speedo hole, one piece tail
housing w/rubber boot, four wire shift indicator
located above shift lever, .840" exposed input
shaft New Process |
NP242J |
UMT208-2 |
|
1998 |
|
GRAND CHEROKEE |
23
spline front input, 27 rear slip output, viscous
clutch, fixed front output yoke, shift indicator
above shift lever, .840" exposed input (with
bushing) New Process |
NP249J |
UMT209-3 |
|
1997-93 |
| GRAND CHEROKEE |
23 spline front
input, 27 rear slip output, viscous clutch, fixed
front output yoke, shift indicator above shift
lever, .840" exposed input (with bushing) New
Process |
NP249J |
UMT209-3 |
|
1997-93 |
|
GRAND CHEROKEE |
23
spline front input 27 spline slip rear two piece
tail housing, 1.750 speedo hole four wire shift
indicator above shift lever fixed front output
yoke (.840" exposed input shaft, w/pilot bushing)
New Process |
NP231J |
UMT207-8 |
|
1995-93 |
| GRAND CHEROKEE |
23 spline front input
27 spline slip rear two piece tail housing, 1.750
speedo hole four wire shift indicator above shift
lever fixed front output yoke, .750" exposed input
shaft New Process |
NP231J |
UMT207-9 |
|
1995-93 |
|
GRAND CHEROKEE |
Select-Trac, 23 spline front input, 27 spline slip
rear, two piece tail housing, w/speedo hole
1.750", fixed front output yoke, four wire
indicator switch above shift lever, (.840" exposed
input shaft, w/pilot bushing) New Process |
NP242J |
UMT208-6 |
|
1995-93 |
| GRAND CHEROKEE |
23 spline front input
27 spline slip rear two piece tail housing, 1.750
speedo hole four wire shift indicator above shift
lever fixed front output yoke (.840" exposed input
shaft, w/pilot bushing) New Process |
NP231J |
UMT207-8 |
|
1995-93 |
|
GRAND CHEROKEE |
23
spline front input 27 spline slip rear two piece
tail housing, 1.750 speedo hole four wire shift
indicator above shift lever fixed front output
yoke, .750" exposed input shaft New Process |
NP231J |
UMT207-9 |
|
1995-93 |
| GRAND CHEROKEE |
Select-Trac, 23
spline front input, 27 spline slip rear, two piece
tail housing, w/speedo hole 1.750", fixed front
output yoke, four wire indicator switch above
shift lever, (.840" exposed input shaft, w/pilot
bushing) New Process |
NP242J |
UMT208-6 |
|
1995-93 |
|
GRAND CHEROKEE |
Quadra-Trac, 23 spline input, 27 spline rear slip,
viscous clutch, slip rear output, fixed front
yoke, 1.750 speedometer hole, shift indicator
located above shift lever, 1.550" exposed input
shaft New Process |
NP249J |
UMT209-2 |
|
1994-93 |
| GRAND CHEROKEE |
Quadra-Trac, 23
spline input, 27 spline rear slip, viscous clutch,
slip rear output, fixed front yoke, 1.750
speedometer hole, shift indicator located above
shift lever, 1.550" exposed input shaft New
Process |
NP249J |
UMT209-2 |
|
1994-93 |
|
Back to Top |
|
GRAND WAGONEER |
23
spline front input 27 spline slip rear two piece
tail housing, 1.750 speedo hole four wire shift
indicator above shift lever fixed front output
yoke (.840" exposed input shaft, w/pilot bushing)
New Process |
NP231J |
UMT207-8 |
|
1993 |
| GRAND WAGONEER |
23 spline front input
27 spline slip rear two piece tail housing, 1.750
speedo hole four wire shift indicator above shift
lever fixed front output yoke, .750" exposed input
shaft New Process |
NP231J |
UMT207-9 |
|
1993 |
|
GRAND WAGONEER |
Quadra-Trac, 23 spline input, 27 spline rear slip,
viscous clutch, slip rear output, fixed front
yoke, 1.750 speedometer hole, shift indicator
located above shift lever, 1.550" exposed input
shaft New Process |
NP249J |
UMT209-2 |
|
1993 |
| GRAND WAGONEER |
23 spline front input
front and rear fixed yokes shift indicator located
to the left side of shift 1.750 speedo hole, Left
Hand Mount New Process |
NP208J |
UMT204-2 |
|
1988-84 |
|
GRAND WAGONEER |
23
spline front input front and rear fixed yokes
shift indicator located to the left side of shift
1.750 speedo hole, Right Hand Mount New Process |
NP208J |
UMT204-1 |
|
1988-84 |
| GRAND WAGONEER |
23 spline front input
front and rear fixed yokes shift indicator located
to the left side of shift 1.750 speedo hole, Left
Hand Mount New Process |
NP208J |
UMT204-2 |
|
1986-84 |
|
GRAND WAGONEER |
23
spline front input front and rear fixed yokes
shift indicator located to the left side of shift
1.750 speedo hole, Right Hand Mount New Process |
NP208J |
UMT204-1 |
|
1986-84 |
| GRAND WAGONEER |
23 spline front input
front and rear fixed yokes shift indicator in rear
half of case New Process |
NP228J |
UMT204-4 |
|
1985 |
|
GRAND WAGONEER |
23
spline front input front and rear fixed yokes
shift indicator in rear half of case New Process |
NP228J |
UMT204-4 |
|
1985 |
| GRAND WAGONEER |
23 spline front input
no shift indicator, front and rear fixed yokes New
Process |
NP228J |
UMT204-3 |
|
1984 |
|
GRAND WAGONEER |
23
spline front input no shift indicator, front and
rear fixed yokes New Process |
NP228J |
UMT204-3 |
|
1984 |
|
Back to Top |
| J10,
J20 |
23 spline front input
front and rear fixed yokes w/two wire terminal on
back half of case (may have round or fixed type
front output yokes) viscous clutch, 1.750" speedo
hole New Process |
NP229J |
UMT206-1 |
|
1988-82 |
|
J10, J20 |
23
spline input viscous clutch, two fixed yokes 1.750
speedo hole, has no shift indicator in case New
Process |
NP229J |
UMT205-1 |
|
1988-82 |
| J10, J20 |
23 spline front input
front and rear fixed yokes shift indicator located
to the left side of shift 1.750 speedo hole, Left
Hand Mount New Process |
NP208J |
UMT204-2 |
|
1988-80 |
|
J10, J20 |
23
spline front input front and rear fixed yokes
shift indicator located to the left side of shift
1.750 speedo hole, Right Hand Mount New Process |
NP208J |
UMT204-1 |
|
1988-80 |
| J10, J20 |
23 spline front input
front and rear fixed yokes w/two wire terminal on
back half of case (may have round or fixed type
front output yokes) viscous clutch, 1.750" speedo
hole New Process |
NP229J |
UMT206-1 |
|
1987-82 |
|
J10, J20 |
23
spline input viscous clutch, two fixed yokes 1.750
speedo hole, has no shift indicator in case New
Process |
NP229J |
UMT205-1 |
|
1987-82 |
| J10, J20 |
23 spline front input
front and rear fixed yokes shift indicator located
to the left side of shift 1.750 speedo hole, Left
Hand Mount New Process |
NP208J |
UMT204-2 |
|
1987-80 |
|
J10, J20 |
23
spline front input front and rear fixed yokes
shift indicator located to the left side of shift
1.750 speedo hole, Right Hand Mount New Process |
NP208J |
UMT204-1 |
|
1987-80 |
| J10, J20 |
23 spline front input
front and rear fixed yokes shift indicator in rear
half of case New Process |
NP228J |
UMT204-4 |
|
1985 |
|
J10, J20 |
23
spline front input front and rear fixed yokes
shift indicator in rear half of case New Process |
NP228J |
UMT204-4 |
|
1985 |
| J10, J20 |
23 spline front input
no shift indicator, front and rear fixed yokes New
Process |
NP228J |
UMT204-3 |
|
1984-83 |
|
J10, J20 |
23
spline front input no shift indicator, front and
rear fixed yokes New Process |
NP228J |
UMT204-3 |
|
1984-83 |
|
Back to Top |
|
SCRAMBLER |
front & rear fixed
yokes, cast iron |
DANA300 |
UMT207-11 |
|
1985-83 |
|
SCRAMBLER |
front & rear fixed yoke |